Ghost 2 Immobiliser ReviewsThe ghost 2 immobiliser is a cutting-edge anti-theft device that makes use of modern technology to ward off car theft. This hidden device is not noticed by thieves and only turns on the engine after a PIN or app is entered.
It connects to the CAN data network in your vehicle and is weatherproof. It has a service/valet function that allows you to temporarily start your vehicle while it is in the garage.
Easy to install
The
Ghost immobiliser shields your car from theft of keys, cloning and hacking. It utilizes an exclusive PIN code system integrated with your car's ECU which makes it extremely difficult for thieves to spot or tamper with. It's not visible and does not use sensors or special keys. It's also cheaper than replacing an ECU, or installing a key fob. You can even reduce your insurance premiums.
When installing a Ghost 2 immobiliser, be sure to follow the manufacturer's instructions carefully. This will ensure the device functions properly and efficiently. Test the system after installation by entering the PIN number and then starting the vehicle. Regular testing will help you spot any issues before they become worse.
Make sure you check the position of the CAN H and L wires prior to starting the installation. These are crucial to powering the immobiliser, so it is crucial that they are properly connected. It is also recommended to label the wires so that it makes it easier to identify them during the installation process. Once you have identified the wires, connect them to a power supply of 12V and an earthing source. Be sure to use a fuse tap if necessary to protect the connections from short circuits or damage.
After connecting the wires, neaten up the wiring with cable ties to stop tampering. It is also recommended to cover the wires with insulation tape or heat shrink tubing. This will protect the device from electrical shorts, and prolong its life. It's a great idea to test your Ghost 2 immobiliser once the wiring is secured.
The Ghost 2 immobiliser offers a service mode for situations where you might need to sell your vehicle, such as when it is being serviced or valet-parked. This will disable the PIN sequence temporarily. To activate this feature, simply press the brake pedal while pressing the accelerator, and press a number of times that is equal to the first number of the emergency code. The system will then enter service mode, which is verified by flashing the indication signal five times.
It is simple to change PIN codes
A ghost 2 immobiliser is a great way to protect your car from thieves. It is hidden inside the vehicle and is only accessible by a special code. The device communicates directly with the vehicle ECU through its data bus. It does not rely on radio frequency signals as do traditional Thatcham immobilisers or aftermarket alarm systems. This makes it harder for thieves to detect the click of an immobiliser relay or even to make new keys. The control unit is concealed within the vehicle's wiring harness or dashboard, and cannot be physically tampered with to reset the system.
The ghost 2 immobiliser is linked to your vehicle's CAN Data network. It makes use of buttons on the steering, door panels and the center console, to create a customisable series of up to twenty button presses that need to be entered to start the engine, just as a PIN. This unique next generation system doesn't require any wire cutting upon installation and can be reprogrammed at anytime. You can even start your vehicle in Service or Valet mode when you give the vehicle to a mechanic who will perform work.
You can also use the app to change your PIN number or disable it completely if you've lost your keys. This feature is particularly useful in the event that you've lent your car to someone else to use for valet service or parking. It prevents them from starting the car and driving it away without your consent. It's also unnoticeable by professional thieves, as it doesn't utilize circuit cuts or radio frequencies.
The ability of the immobiliser to prevent relay thefts is another great feature. Relay theft is a typical method of car theft in which criminals hack into the diagnostic port of your car and then alter the signal transmitted by the key to the vehicle's ECU to trick it into thinking that the key is valid. The immobiliser of the traditional model can be bypassed in this way, but with the ghost 2 immobiliser, the signal is blocked by the immobiliser before it reaches the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that shields your vehicle from key-cloning, hacking, and key theft. It connects to the CAN data network of your vehicle and requires the use of a PIN number to start the engine. It also stops thieves from using signal spoofing or device spoofing, which are both common tactics to steal vehicles.
The system is easy to use and works just similar to a standard car alarm. Once you have installed it, you can create a unique PIN code sequence that is up to 20 characters long that must be entered before the vehicle starts. This will prevent the vehicle from being stolen, even the case that you lose your keys. If you need to disable the system, you can do so through an app on your smartphone.
Unlike other systems, the ghost is silent and does not emit any radio frequency signals. It is a quiet, weatherproof device that can be placed anywhere in your vehicle. It can be easily hidden beneath the dash, steering wheel, or on the door panels. It communicates through the CAN data loop with your ECU and is not affected by diagnostic tools used by thieves to locate security systems. It is also not affected by jamming devices which spoof codes.
It is a covert installation that doesn't require any cutting of wires or modifications to the car and can be employed as an anti-theft device for all vehicles. Its technology has been proven be efficient and is in line with TASSA standards. The Ghost is a good choice for classic or sports automobiles. It can also be used as a method to safeguard vehicles hired on websites like Turo.
The Autowatch Ghost 2 is the next generation of vehicle immobilisers. The system is completely inaccessible to thieves and stops the vehicle from starting without your PIN, or unless they are authorized by the app. It also doesn't emit any radio frequencies or other signals that can be detected by scanners. The installation process is simple and quick. The app is easy to navigate and offers a user-friendly interface which makes it simple to install and use. It also comes with a GPS tracker that can assist police find the vehicle and locate it.
Easy to reset
It is possible to safeguard your vehicle from theft using a
ghost immobilisers 2 immobiliser. It integrates with your vehicle's ECU to create a barrier that thieves are unable to penetrate without the correct PIN. The device is also TASSA verified which means it's recognized by insurance companies. It is a powerful tool to deter theft of your car and can save you money in the long run.
Contrary to traditional alarms/immobilisers which require cutting circuits and circuit cutting, the Ghost system is connected directly to the vehicles CAN data network. It works by with the existing buttons on the dashboard as well as the steering wheel. You can create a unique pin that can be up to 20 presses long. The PIN must be entered before the engine can begin like the credit card's PIN. The
ghost 2 immobiliser near me system is inaccessible to thieves and there aren't LEDs to signal its presence. This makes it the most effective aftermarket CAN-bus immobiliser on the market today.
The Ghost system has another advantage that it does not transmit radio frequency signals. This means it cannot be detected by thieves or snatched up.