Autowatch
ghost 2 immobiliser problems Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's subtle, doesn't have keys or LEDs and is hidden within the vehicle's wiring.
It also allows the user to disable the system temporarily through Transport Mode in the event of renting their vehicle. This guide will guide you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch
ghost immobiliser 2 immobiliser is a cutting-edge security device that protects your vehicle against hacking, key cloning and relay attacks. The system links directly to your vehicle's ECU and is protected by a unique pin code of your choice. It's inaccessible to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by circuit cuts.
The system is easy to use, however it's essential to use a an expert installation to ensure a clean and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete your vehicle's protection package.
To prevent an accidental deployment of airbags or short circuits The installer must first remove your battery. Once this is done the installer is now able to begin work. Basic hand tools are useful to make precise connections, while a multimeter can be used to verify electrical values and ensure safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring tidy. The Ghost Immobiliser user manual will provide specific guidelines specific to your particular model.
During the installation, it is essential to choose the right grounding location that is free of any paint or debris. The installer must be sure that the immobiliser's H and CAN L wires are connected to the correct ports on the vehicle's ECU. The wires can be plugged in or soldered based on the model. A high-quality connector is recommended to ensure a durable and secure connection.
Transport Mode can be activated by the client after the installation is complete. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. Once this is done the system will verify with 5 indication signals.
The Autowatch
ghost vehicle immobiliser 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great choice for anyone who frequently rents out their vehicles through platforms such as Turo. An immobiliser can reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device protects your vehicle from starting even when a criminal steals or copies the key. This is due to its sophisticated technology that is designed to stop the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and wheel to create a unique sequence only you can identify which makes it impossible for someone else to start your vehicle. This is the ultimate security system that protects your car's pride and joy, keeping its value intact should you decide to sell it in the future.
Installing a ghost immobiliser is an easy process, however, it is crucial to follow the directions carefully to avoid electrical issues and system malfunctions. First, you must locate and identify a constant 12V power source as well as an appropriate grounding point on the chassis of your vehicle. Then, you can begin to connect the wires that will be used to activate the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a secure connection. Also, make sure to protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
After the wires have been connected, you are able to reconnect the battery and start the engine to test the immobiliser's function. If everything is functioning properly you can place it in a secure location beneath the dash or anywhere else in the vehicle. Make sure to hide it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it complies with the highest standards of security and is a great deterrent to car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and it can't be disabled without knowing the code. The device is also easy to use and can be put into an auto valet mode so that your vehicle will not be activated when you take it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It connects directly to your vehicle's CAN bus network and communicates with the ECU, making it virtually undetectable as an addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with your vehicle's factory settings.
The system is also unnoticeable by thieves using scanners for diagnostics. The system does not send or receive radio frequency signals and instead uses CAN data for communication with your ECU. In addition, it doesn't need any modification to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one buttons) and turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your vehicle and leave in peace.
Once installed, the Ghost Immobiliser will safeguard your
vehicle from hacking and key cloning and will also protect the value of your car's pride and joy. If you ever have to hand over your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete the
ghost immobilise Immobiliser installation, you'll have to locate the source of power that is constant (12V) and an earthing point. Be sure that both are well-insulated and able to be touched. It is also recommended to use cable ties to tie and secure the wires, as this will decrease the chance of tampering by potential thieves. To avoid committing mistakes, make sure to double-check these points and mark them with labels or tape. Check all connections for signs they're wearing out. Make sure all connections are securely in place, and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is complete. This will make sure that the unit is operating correctly, and that all connections are safe and well-insulated. If you encounter any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your vehicle's ECU to stop unauthorised engine start. Its innovative technology protects your vehicle from key cloning and hacking and other methods that thieves employ to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unmatched features, paired with its subtle design makes it a sought-after option for both car enthusiasts and security conscious drivers.
It is important to follow the steps of installation to ensure the correct integration of the
ghost immobiliser birmingham Immobiliser.