Ghost 2 Immobiliser Problems
It is designed to safeguard vehicles from hacking and key cloning, the Ghost 2 immobiliser is a discreet device that can be installed without damaging your vehicle. It stops your vehicle from starting unless you enter the correct sequence of buttons inside your vehicle, similar to a password on a mobile phone.
Stop/Start
Ghost Immobilisers prevent vehicles from being stolen by blocking the engine from starting unless it receives the correct PIN code. This is done without modifications to the vehicle, and is totally undetectable to thieves. The unit communicates with the ECU via the CAN data bus, which allows it to lock the vehicle. This system is similar to the ones used by car manufacturers for years. However, thieves cannot bypass it with a new key or key relay technology, as they can using factory-installed systems.
Ghost Ghost can be fitted to any van, car motorhome, caravan, or bike with an engine. It's compatible with all popular makes of vehicles. The same system can be used on electric vehicles. It is a great alternative to wheel clamps and steering wheel locks.
When the Ghost is activated it will block all buttons in your car and stop the ignition from being started without the PIN code. This can be accomplished using the Android or Apple mobile apps or by entering the code through your key fob. If the wrong code is entered, the app will display an indicator light. The Ghost will not let the vehicle to be restarted. This is a great method to discourage thieves. If the vehicle is unable to be started, they will move on.
The Ghost is a weatherproof, small device that can be hidden away in the most difficult to access parts of your vehicle. The installation process takes between 20 and 30 minutes for each vehicle. It is also very simple to remove if you decide to change your vehicle or return it for service or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by a number of insurance companies. It is also equipped with a safe emergency Pin Code override and features a Service/Valet Mode that can be activated by pressing a button on the app or using your key fob.
Disarm
Contrary to the mechanical devices, which can be removed and reinstalled, ghost immobilisers are concealed and are integrated into the car. They are virtually impossible to hack or bypass and, even if they are found, a thief cannot start the engine. Ghost immobilisers are able to prevent key cloning as well as signal jamming and devices spoofing. These are the methods thieves use to gain access to vehicles that have standard immobilisers.
The immobiliser sends a message to the ECU. If a incorrect code is received, the vehicle will not start since the engine won't start. It is possible to disable a ghost immobiliser by using an application program, but it would be extremely difficult and time-consuming to accomplish this. The software must be installed and used by a authorized installer.
The Ghost immobiliser is a small device that is tucked away in the wiring loom of the vehicle and is not visible to the naked eye once installed. It is not visible on diagnostic systems. There are no LED indicators, and it isn't able to communicate with the engine via the OBD port. It communicates without sound via the CAN data circuit.
The system will not allow the vehicle to start unless it receives an input PIN code that is entered by the user. The code is entered by pressing buttons on the steering wheel or door panels, or central console. This is a how much is a ghost immobiliser (
click to find out more) safer method of protecting your vehicle as it does not require the use of keys or a remote control.
Ghost also has a service-mode that is activated through the mobile application. This allows you to give your keys to someone else to use for valet parking or service, without the need to enter the disarm sequence.
No matter if your Ghost is in service mode or not you should not attempt to remove the system yourself as it can affect the engine and cause damage. It is recommended to speak with an installer certified by TASSA who will safely and effectively remove the system. Our latest GHOST immobilisers include a special fingerprint QR sticker, which is hidden in various parts of your vehicle. They are linked to our security register. If the system is removed and then is sold on the blackmarket, this will allow you to trace the original owner.
Anti-Hijack
The anti-hijack feature is a key feature of the
ghost immobiliser price Immobiliser 2. This system is a smart key that shields your vehicle from theft. When the ignition switch is turned to on, and the
car immobiliser ghost is stationary for 30 seconds then the Ghost system will automatically stop the engine and turn the hazards lights on. This gives the driver or passengers enough time to press a secret security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to begin.
Contrary to many other systems that simply stop the engine once the ignition is switched on The Ghost system is based on a specific controller and timer unit which will close the valve for cutting off fuel 14 if it is activated after an agreed-upon time even if the ignition is still turned on! This delay time period must be sufficiently long to allow the victim of the vehicle to move away from the location of the robbery and sufficient distance from the stalled vehicle before the system can be activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an extra level of security that prevents common hacking methods that are used to hack into modern vehicles like relay attacks, key range extending and ECU swapping. The Ghost system communicates in a non-intrusive way and does not emit signals that could be picked by a thief with codes-grabbing or RF scanning technology.
The Ghost system has a service / valet mode that allows your vehicle to be temporarily started and driven without the need for a PIN code. This is a great option when you park your vehicle and only need to leave it for a brief time in order to open the garage door or place groceries in the boot. The system will exit service mode according to speed and duration or via the simple PIN code entry procedure that gives you total assurance that only YOU can use your vehicle!
Keyless Entry
Many consumers are now looking for extra security measures because of the growing trend of car thefts using contactless technology. This is especially relevant for those who have invested time or money to personalize their vehicle and own rare/expensive vehicles. Immobilisers that are added to your vehicle can be an effective way to deter this type of theft because they will stop your vehicle from starting until correct pin code is entered, along with your key fob.
Immobilisers are designed to impede a variety of vehicle circuits which include ones that control the starter motor and the fuel pump. They also are able to shut down the car alarm to draw attention and scare off any potential thieves.
These devices communicate directly with the engine control unit via the CAN data network. They stop the thief from gaining access to it by installing a replacement ECU or by using key programmers. These immobilisers are installed discreetly in your vehicle, leaving no traces and are inaccessible to the tools high-tech thieves employ.
Unlike other systems that require a separate application, or a tag to be carried on the driver's person, a
ghost immobiliser near me immobiliser is only disarmed by pressing a sequence of existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to choose a personal pin sequence. The pin can be easily changed, making the device as secure as a bank card.