Ghost 2 Immobiliser Problems
It is designed to safeguard vehicles from hacking and key cloning, the Ghost 2 immobiliser is a discreet device that can be installed without damaging your vehicle. It stops your vehicle from starting unless you enter a specific sequence of buttons within your vehicle, similar to the password of a mobile phone.
Stop/Start
Ghost immobilisers prevent vehicles from being stolen by preventing the engine from running until it is issued the correct PIN code. This is done without modification to the vehicle and is totally undetectable to thieves. The unit communicates with the ECU via the CAN data bus to disable the vehicle. This system is similar to the one that car manufacturers have been using in their cars for many years However, thieves cannot add a new key or utilize key relay technology to bypass it like they could with factory-installed systems.
A Ghost can be fitted to any vehicle, van, motorhome, caravan or bike with an engine. It's compatible with all the popular brands of vehicles. The same system is compatible with electric vehicles. It's a great alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will block all the buttons in your car and stop the ignition from starting until a PIN code has been entered prior to. You can enter the code by hand or using the Android or Apple app. If the incorrect code is entered the app will display an indicator light. The Ghost will then not allow the vehicle to be restarted. This is a great way to discourage thieves. If the vehicle can't be started and they are unable to get it started, they will leave.
The Ghost is a weatherproof, small device that can be tucked away in the most inaccessible parts of your vehicle. Installation takes between 20 and 30 minutes for each vehicle. It is also very simple to remove should you choose to move your vehicle around or hand it in for service or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognised by a number of insurance companies. It is also equipped with an emergency Pin Code override and features a Service/Valet mode that can be activated using a button on the app or by using your key fob.
Disarm
In contrast to the mechanical anti-theft devices, which can be removed, ghost immobilisers are hidden and integrated into the vehicle. They are nearly impossible to hack or bypass and even if found, a thief cannot start the engine. This is because a ghost immobiliser prevents key cloning, signal jamming and device spoofing - techniques that are commonly used by thieves to gain access to vehicles that have standard immobilisers.
The immobiliser sends a code to the ECU. If the incorrect code is received, the vehicle cannot be launched as the engine will not fire up. It is possible to disable a ghost immobiliser with a software tool, but it would be very difficult and time consuming to do so. Only an authorised installer can install and use the software.
The Ghost immobiliser, a tiny system, is hidden within the wiring loom of your vehicle. It is not visible to the naked eye once installed. It is not visible on diagnostic systems. There are no LED indicators and it doesn't communicate with the engine through the OBD port. It communicates silently through the CAN data circuit.
The system won't allow the vehicle to start unless it is given an input PIN code that is entered by the user. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a much safer method of protecting your vehicle as it does not require keys or remote control.
In addition, Ghost also has the option of a service mode that can be activated through the application on your mobile phone. This lets you give your keys to someone else for service or valet parking, without having to enter a disarm sequence.
If your
ghost immobiliser birmingham is in service mode or not you should never attempt to remove the system yourself since it could impact the engine and cause damage. It is recommended to contact an installer certified by TASSA who will safely and effectively remove the system. Our latest
autowatch ghost immobiliser cost II immobilisers also include a special QR fingerprint sticker that is hidden in different areas of your vehicle, these are linked to our global security register - in the event the system is removed and is sold on the black market, this will connect it back to its original owner.
Anti-Hijack
Ghost Immobiliser 2 has a very useful anti-hijack feature. This system is a smart key that guards your car from theft. The
ghost immobiliser birmingham system will automatically switch on the hazard lights and stall the car's engine when the ignition is switched on and the vehicle is stationary. This allows the driver and passengers enough time to press the security button before the system is activated.
In contrast to other systems that simply stop the engine whenever the ignition switch is turned on The Ghost system uses a special controller and timer unit that will close the valve for cutting off fuel 14 if it is activated after the set time even when the ignition is in operation! The delay period must be sufficient to allow the hijacked vehicle owner to leave the vehicle and a distance sufficient from the vehicle that is stalled before the system can be activated.
The Ghost comes with added security that prevents common hacking techniques used to gain access to modern vehicles like relay attacks and key range expanding. This is due to the fact that the Ghost system communicates silently and does not emit any signals that could be picked up by thieves using code grabbing or RF scanning technology.
The
ghost immobiliser problems system has an option for service or valet mode that allows your vehicle to temporarily be started and driven without the requirement for a PIN code. This is ideal for parking your car and need to leave it for a brief amount of time, for example, to store groceries in the boot, or open a garage door. The system will then exit the service mode based on the speed and time, or via a simple PIN code input process. This gives you total peace-of-mind that only YOU can drive your vehicle!
Keyless Entry
Many consumers are now looking for extra security measures due to the rising trend of thefts from cars using contactless. This is particularly applicable to those who have put time or money into personalising their vehicle and own rare/expensive vehicles. Add-on immobilisers are a great way to deter this kind of theft because they will stop your vehicle from starting until the proper pin code is entered along with your key fob.
Immobilisers are designed to be used on a variety vehicle circuits including ones that control starter motors and fuel pumps. They also are able to shut down the car alarm to draw attention to and frighten away any potential thieves.
These devices are directly connected to the engine control unit through the CAN data network and stop the thief from gaining access to it by installing a new ECU or using key programmers. These immobilisers are installed discretely inside your vehicle, leaving no trace and are completely inaccessible to the tools sophisticated thieves use.
As opposed to other systems that require a specific application, or a tag that is worn on the person carrying it and a Ghost immobiliser can only be disarmed by pressing a sequence of existing electronic buttons on your steering wheel, door panel and centre console, allowing you to choose a personal pin sequence. The pin can be changed as often as you like, meaning it is as secure as a credit card, and can be more difficult to hack due to it requiring up to 20 press.
Ghost also has a Valet/Service mode that allows you to deactivate it if you intend to give your vehicle to valet parking, or for service.