What You Need to Know About Outdoor Wood Burners
Outdoor wood burners are an affordable method of heating homes and businesses. They also reduce the dependence on fossil fuels that are non-renewable and aid in a sustainable energy strategy.
Wood that is well-seasoned is crucial for efficient burning. Unseasoned or green
wood burning fires can contain more moisture which can cause creosote to accumulate and decrease performance.
Efficient
Outdoor wood burners have been around for a long time. They are a cost-effective and eco-friendly method of heating your home. However, the standard design of OWBs, which promotes the slow and cooler burning which results in poor
outside wood burners combustion and more smoke, creosote, and particulates. These unburned fuels could lead to health problems, fire hazards and degrade the environment.
Additionally, the visible plume of smoke that OWBs emit can make neighbors angry and result in DEC (Department of Environmental Conservation) enforcement action. This kind of problem can affect the value of your property, and may lead to your OWB being closed down.
Crown Royal Stoves has a range of outdoor wood furnaces that are EPA Certified. The Pristine Gasification Series uses technology to increase the efficiency of combustion and create an unburned, clean and smoke-free. This is achieved by using the negative pressure air system that draws fresh hot, dry and filtered air from the bottom of the boiler and pushes it back out through the chimney at a higher rate than conventional outdoor wood boilers. This is accomplished by an innovative design that makes use of a multi-pass, water filled heat exchanger made of 409 Titanium Enhanced Stainless Steel.
If properly used when properly used, the Pristine Series OWB has an efficiency of 99% for a cleaner and smoke-free fire. It uses less wood and produces a lot less emission than traditional OWBs. It is important to burn dry, clean, and seasoned wood in order to enhance the performance of your OWB. It is recommended that you get your wood seasoned for a period of six months or a year prior to burning it. This will ensure an efficient and clean burn.
In addition to improving the performance of your wood stove and enhancing the efficiency of your wood burner by performing a "dry burn" every week. This method helps to eliminate creosote buildup, keeps your boiler running efficiently and increases its lifespan. By adding a stick for removing creosote to your stove every time you fill it up, you can dramatically reduce the amount of creosote you need to use. This product is available at Wisconsin Wood Furnace.
Clean
A wood burning stove can become very dirty from burnt soot particles. They are extremely difficult to remove If you notice any spots of soot build-up on the glass of your stove, clean them right away. Soot that is not removed will harden, making it even more difficult to remove. It's important to use the right cleaners however, you must be careful not to scratch the glass with anything that could scratch it. This could leave a weak spot that could break the glass if it's exposed to extreme temperatures.
Before you begin cleaning your
wood burner it is important to ensure that it is unlit and completely cool. Also, be sure that the surrounding area is covered with newspaper. This will stop any spillage of ash which can stain and mark surfaces.
Depending on the quality of the wood that you select, it can take up to a year for your stove to become properly well-seasoned. The
Outside Wood Burners that is properly seasoned will not only burn more efficiently, but will also produce less creosote. This is the substance that builds up on your chimney, which reduces effectiveness and creating a fire hazard. If you're using unseasoned wood, or just starting a fire in your outdoor fireplace, it's recommended to open the lower backdoor and scoop the the ashes into a non-combustible container each week.
A sediment flush is recommended on your boiler every four years. This is a simple flush lasting five seconds from the bottom drain valve on your boiler. This will get rid of any sediment that has built in the system and will ensure that your boiler runs well.
Once you have done the sediment flush, it's time to clean the exterior of your outdoor wood burner. Before you begin, it's crucial to cover the floor area around the stove with newspaper. It is also advisable to wear gloves and protective eyewear. You should also have a shovel, a metal container for ash, and a scraping tool. To protect the refractory you should lay down a cloth to shield it as you scrape away ash and coal deposits.
Easy to operate
Outdoor wood boilers (also called outdoor furnaces, outdoor wood hydronic heating systems or outdoor wood heaters) are often misunderstood, despite their acclaim. They were one of the "it" trends of the 1990s,
Outside wood Burners along with hairstyles for mullets. They're not the same as the well-known EPA wood stoves, which are designed to burn at low temperatures and run continuously. They use more combustion and produce more smoke. Certain local governments restrict or prohibit their use.
OWBs work best for homes with high levels of insulation. The smoldering, visible smoke is also a cause of complaint with neighbors, and has led to many OWBs being shut-down or being sued in the past. To allow OWBs to operate properly they must be operated using dry wood with low moisture content. Wood that is not seasoned or green will reduce efficiency, causing creosote build-up and reduce the life of the burner. A moisture gauge will allow you determine how long it takes for wood to dry.
In contrast, dual-stage
cheap wood burner gasification boilers (OWGB) employ three steps that uses more of the available energy from the wood and results in much less smoke. These furnaces are more efficient than traditional OWBs, and can be used for many different fuels. Wood gasification boilers require dry, seasoned firewood. The majority of wood will be seasoned within a year, however oak and other hardy species could require two years or more to fully season. This is due to lower amount of water and a higher density. This allows them retain heat for longer, increasing efficiency and decreasing pollution. The EPA "Burn Wise" website and Cornell Cooperative Extension are great sources for homeowners to learn how to burn wood efficiently to reduce pollution to the air.
Low Maintenance
Modern outdoor wood stoves are designed to be environmentally friendly. In contrast to indoor wood burners which emit significant smoke, modern outdoor furnaces burn cleanly without the release of excessive carbon monoxide or heat. They also require less wood to produce the same amount of heat as traditional stoves.
Outdoor wood burners require less maintenance and are more accepting of moisture content in wood than indoor wood burning stoves. However, outdoor wood burners can only be used with properly prepared or "cured"
wood burning fireplace. Some types of wood can take up to a full year. Use a moisture gauge prior to loading to check the amount of water contained in your wood.
When operating, it is essential to check the system regularly for creosote accumulation. Creosote is a by-product of combustion, may build up in the chimney and flue if they are not cleaned regularly. It can be removed by pouring a creosote-removing product into the fire. Regular cleaning of the chimney and flue can remove harmful creosote and increase efficiency.
Crown Royal Stoves developed a new airflow technique called Negative Pressure Gasification to attain 99% efficiency in combustion. This technology is used in our EPA certified Pristine Series Outdoor Wood Furnaces to draw air upwards from the bottom and push all gases through an insulated secondary combustion chamber surrounded by water with easy-to-clean Turbulators. The result is a smokeless & pollutant free burning.